The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

Offset Hub Hand Truck & Wheelbarrow Wheels

This collection holds offset hub hand truck and wheelbarrow wheels with flat-free rubber and pneumatic treads, made to replace worn wheels on trucks and barrows. Wheels in this collection range from 350 to 650 lb per wheel. Wheels in this category range from 8 up to 10 inches in diameter with 2.5 to 3 in tread widths. The 8 x 2.5 in recycled rubber flat-free wheel is rated 450 lb. The 10 x 2-3/4 in rubber flat-free wheel is rated 650 lb. A 10 x 3 in rubber pneumatic 4-pack is rated 350 lb per tire. Offset hubs clear the frame on many hand trucks and wheelbarrows. Pneumatic rides softest on rough ground; flat-free never goes flat. Match the bore, hub length, diameter, and tread width before you order. Confirm the load rating printed on the title before you order. Complete trucks: industrial hand trucks. More sizes: hand truck wheels.

Shop by wheel type

3 types

Wheel = wheel diameter · capacity is per wheel.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

Offset Hub Hand Truck & Wheelbarrow Wheels

Shop by wheel type