The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

Gas cylinder ratchet straps

This collection holds Quick Release casters with mixed tread wheels, built for heavy equipment, dies, molds, and plant carts that move very heavy loads. Casters in this collection are rated 3,333 lb per caster. Wheels in this category are 2 inches in diameter with a 10-1/2 in tread width. Flanged and V groove track wheels ride on rail or angle iron track for straight line travel. Wheel options vary, so match the tread to the floor and the load. Match plate size, bolt pattern, and overall height before you order. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Check the floor type and the heaviest load the cart will carry before you choose. Call or email CasterHQ with the part number from the old unit if you need help matching it. Polyurethane aisle: polyurethane casters. Wheel hub: replacement wheels.

Type

Widths or sizes

Listed rating

Ratchet strap

2 in

3,333 lb

Before you order

The rating on each of these gas cylinder ratchet straps is the working load limit for the assembly; add up the limits of every strap on the load and check the total against the securement rules for your trailer.

For gas cylinder ratchet straps, pick the end fitting for the anchor point: flat hooks for flatbed rails, wire or J hooks for stake pockets and frames, D-rings and E-track fittings for van walls.

Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com

Sources

[S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

Gas cylinder ratchet straps

Gas cylinder ratchet straps on this page

Before you order

Sources