Up to 350 lbs
Up to 7,000 lbs
Up to 16,000 lbs
Up to 40,000 lbs
Shock absorbing
Outdoor / rough terrain
View All Specialty Casters
Browse all specialty caster types
All measurements indicate the wheel diameter by the tread width.
The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.
W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.
Plate dimensions shown are overall mounting plate size.
When replacing existing casters, select the closest plate size and verify bolt-hole compatibility.
BHP = Bolt Hole Pattern, shown under each plate.


















Iron for heat, chips, and the heaviest track loads. Polymer when rust on the tread is the failure mode and loads stay in the mid band [S1][S2].
| Material | Loads on this page | Temperature fields |
|---|---|---|
| Cast iron | 350 to about 1,200 lb | About -45 to 600°F |
| Ductile iron | 1,500 to 7,000 lb | Toward 800°F |
| Polymer | About 2,200 lb on listed sizes | About -45 to 180°F |
Active products on this page; materials and loads from product fields [S1].
Related: cast iron V-groove track wheels · gray iron semi-steel · gate casters
About 350 lb to 7,000 lb per wheel on active listings.
This hub is the cleaner cast / ductile / polymer map. The cast-iron-titled collection also includes solid polyurethane V-groove SKUs in the live assortment.
Yes for two-track setups. One track with matching-height flat wheels on the other side can forgive imperfect alignment.
When rust is the main risk and load fits the polymer rating, yes. For heat or max tonnage, stay with ductile or cast iron.
Jordan Wilson, CasterHQ · reviewed October 26, 2026 · 844-439-4335 · info@casterhq.com
Search
