The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

6" x 2" Polyurethane Wheels · 1,800 lb

This collection holds W 2 Tread 13 with polyurethane treads, made to replace worn wheels on carts, dollies, racks, and equipment. Wheels in this collection are rated 1,800 lb per wheel. Wheels in this category are 6 inches in diameter with a 2 in tread width. Polyurethane (poly or urethane) treads are quiet, floor safe, and resist water and many chemicals. Softer polyurethane or soft rubber or TPR tread is the better pick when the floor has chips or grit. Match the bore, hub length, diameter, and tread width before you order. Order the axle and spacers if the old ones are worn. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Check the floor type and the heaviest load the cart will carry before you choose. Polyurethane aisle: polyurethane casters. Caster hub: heavy duty casters.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

6" x 2" Polyurethane Wheels · 1,800 lb