The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

5" x 1.25" TPU Wheels

This collection holds 5 in x 1.25 in TPU Wheels on 5/16 in bearings with mixed treads, made to replace worn wheels on carts, dollies, racks, and equipment. Wheels in this collection are rated 250 lb per wheel. Wheels in this category are 5 inches in diameter with 1 to 1-1/4 in tread widths. Wheel options vary, so match the tread to the floor and the load. Common uses include food service, bakeries, hospitals, schools, laboratories, and material handling carts. Match the bore, hub length, diameter, and tread width before you order. Order the axle and spacers if the old ones are worn. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Check the floor type and the heaviest load the cart will carry before you choose. Polyurethane aisle: polyurethane casters. Caster hub: heavy duty casters.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

5" x 1.25" TPU Wheels