The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

5" x 2" Polyurethane Wheels · 700-1,200 lb

This collection holds casters with 5 wheels with polyolefin and polyurethane treads, made to replace worn wheels on carts, dollies, racks, and equipment. Wheels in this collection range from 700 to 1,200 lb per wheel. Wheels in this category are 5 inches in diameter with 1-1/2 to 2 in tread widths. Polyolefin is light, low cost, and resists water and many chemicals. It is hard, so it is loud on rough floors. Polyurethane (poly or urethane) treads are quiet, floor safe, and resist water and many chemicals. Match the bore, hub length, diameter, and tread width before you order. Order the axle and spacers if the old ones are worn. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Polyolefin aisle: polyolefin casters. Caster hub: heavy duty casters.

Shop by wheel type

2 types

Wheel = wheel diameter · capacity is per wheel.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

5" x 2" Polyurethane Wheels · 700-1,200 lb

Shop by wheel type