SALES & TECHNICAL SUPPORT
844-439-4335
Mon-Fri 8AM-5PM CST
Order History
/ Reorder Quick Order
by Part # Login
0 Cart
Back to Casters

All measurements indicate the wheel diameter by the tread width.

The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

Plate dimensions shown are overall mounting plate size.
When replacing existing casters, select the closest plate size and verify bolt-hole compatibility.
BHP = Bolt Hole Pattern, shown under each plate.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″
BHP: 1-3/4″ × 2-7/8″, slotted to 3″
BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″
BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″
BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)
BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)
BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"
BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"
(3″ Wide Casters), Industry-Standard
(3″ Wide Casters), Industry-Standard
BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"
BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"
BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"
BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"
View All • 21 Plate Sizes
View All • 21 Plate Sizes
Plate Casters
Plate Casters
Stem Casters
Stem Casters
Stainless Casters
Stainless Casters
Ergonomic Casters
Ergonomic Casters
Leveling Casters
Leveling Casters
Back to Wheels
Caster Wheel Materials & Selection Guide

Caster Wheel Materials & Selection Guide
Polyolefin Wheels

Polyolefin Wheels
High Temperature Wheels

High Temperature Wheels
Track Wheels (All Types)

Track Wheels (All Types)
Hand Truck Wheels

Hand Truck Wheels
Rubber Wheels (All Types)

Rubber Wheels (All Types)
Nylon Wheels

Nylon Wheels
Keyed Drive Wheels

Keyed Drive Wheels
Pneumatic Wheels

Pneumatic Wheels
Atx Off-road Wheels

Atx Off-road Wheels
Poly Wheels (All Types)

Poly Wheels (All Types)
Phenolic Wheels

Phenolic Wheels
Metal Wheels (All Types)

Metal Wheels (All Types)
Flat-free (Foam-filled)

Flat-free (Foam-filled)
Wheel Replacement Parts

Wheel Replacement Parts
Back to Parts
Caster Plate Mounting Hardware

Caster Plate Mounting Hardware
Quick Change Caster Pads

Quick Change Caster Pads
Caster Frames - Swivel & Rigid

Caster Frames - Swivel & Rigid
Sockets & T-nuts For Casters

Sockets & T-nuts For Casters
Washers

Washers
Expanding Rubber Adapter Kits

Expanding Rubber Adapter Kits
Bumpers

Bumpers
Axles & Nuts

Axles & Nuts
Spanner Bushings

Spanner Bushings
Caster Shims & Weld Plates

Caster Shims & Weld Plates
Furniture Glides

Furniture Glides
Floor Truck Locks

Floor Truck Locks
Swivel Locks

Swivel Locks
Wheel Bearings

Wheel Bearings
Back to Material Handling
Back to menu
Shop by IndustryAll 20 industries ›
Healthcare & Medical Material Handling Food Service & Food Processing Aerospace & Aviation Automotive Manufacturing & Industrial Data Centers Furniture & Fixtures Hospitality Institutional & Education Laundry & Linen Marine Horticulture & Gardens Retail Environment Robotics & Automation Air Cargo Defense & Military Oil, Gas & Energy Sanitation & Washdown Towline & Tugger
Shop by ApplicationAll applications ›
Specialty Casters Specialty Casters Gate Casters Gate Casters BBQ Pit & Smoker Casters BBQ Pit & Smoker Casters Keyed Drive Wheels Keyed Drive Wheels Drywall Cart Casters Drywall Cart Casters Skid Wheels & Casters for RVs Skid Wheels & Casters for RVs Leveling Casters Leveling Casters Shopping Cart Wheels & Casters Shopping Cart Wheels & Casters Band Equipment Casters & Wheels Band Equipment Casters & Wheels Low Profile Casters Low Profile Casters Cart Wheels & Casters Cart Wheels & Casters Toolbox Caster Sets Toolbox Caster Sets Bakery Oven Rack Casters Bakery Oven Rack Casters Kitchen Prep Table Caster Sets Kitchen Prep Table Caster Sets Wire Shelving Casters Wire Shelving Casters Silent Glide Casters Silent Glide Casters
Back to Brands
ALBION CASTERS

ALBION CASTERS
BLICKLE CASTERS

BLICKLE CASTERS
HAMILTON CASTERS

HAMILTON CASTERS
P&H CASTERS

P&H CASTERS
SHEPHERD CASTERS

SHEPHERD CASTERS
B&P MANUFACTURING

B&P MANUFACTURING
SAFE 'N SECURE

SAFE 'N SECURE
HUDSON BEARINGS

HUDSON BEARINGS
QUANTUM STORAGE

QUANTUM STORAGE
AMERICAN MOVING SUPPLIES

AMERICAN MOVING SUPPLIES
COLSON CASTERS

COLSON CASTERS
DURASTAR CASTERS

DURASTAR CASTERS
CORPS DESIGN

CORPS DESIGN
FAULTLESS MEDICAL CASTERS

FAULTLESS MEDICAL CASTERS

6" x 3" Nylon Casters

Plate sizes: 6-1/4 x 7-1/4Diameter: 6 inTread: 3 inCapacity: up to 7,200 lb
6-1/4 x 7-1/4 inch top-plate casters for chemical, food-contact, and washdown carts. Typical builds show wheel diameters 6 in, nylon treads, and capacities 7,200 lb. Bring plate and stem measurements when replacing unmarked casters so the new corners sit level. Larger plates spread bolt stress on thick frames under continuous tow abuse. Pair swivel and rigid casters for tracking, or use total locks where the cart must park on a grade.

2 options in this exact size and spec. See all casters by load capacity and mount type › or call 844-439-4335 for a cross-reference.

7200 lbs
TieredPricing
Albion Casters Ultimate Kingpinless Caster - 6" x 3" Trionix Nylon with Poly-Cam Brake and 7.25" x 6.25" Plate, Heavy-Duty Performance - Model 600NX06528SP Albion-Casters
Ships in 1-3 Business Days
Albion 600NX06528SP 6" x 3" Nylon Caster — 7200 lb
Part # 600NX06528SP
from $1,123.00
Volume pricing available
NylonPlate
Load rating
7200 lbs
Diameter 6"
Capacity 7200 lbs
Wheel Nylon
Mount Plate
Plate Size 6-1/4" x 7-1/4"
More Details Less Details
Width 3"
Height 8-1/2"
Rig Type Swivel with Brake
Brake Side Lock Brake
Frame Zinc Plated Steel
The Albion 600NX06528SP is a 6" x 3" nylon plate caster rated 7200 lbs...
Shop Product
7200 lbs
TieredPricing
Albion Casters Ultimate Kingpinless Caster 6" x 3" Trionix Nylon with 7.25" x 6.25" Plate - Heavy-Duty Industrial Caster 600NX06528S Albion-Casters
Ships in 1-3 Business Days
Albion 600NX06528S 6" x 3" Trionix Nylon Kingpinless Caster – 7.25" x 6.25" Plate
Part # 600NX06528S
from $1,040.00
Volume pricing available
NylonPlate
Load rating
7200 lbs
Diameter 6"
Capacity 7200 lbs
Wheel Nylon
Mount Plate
Plate Size 6-1/4" x 7-1/4"
More Details Less Details
Width 3"
Height 8.5"
Rig Type Swivel
Brake No Brake
Frame Zinc Plated Steel
Albion Casters Ultimate Kingpinless 6" x 3" Trionix Nylon Caster with 7.25" x 6.25"...
Shop Product

Industrial Line Albion Casters - Nylon Wheels with 7-1/4" x 6-1/4" Top Plate

Product Features

  • Top Plate Size: 7-1/4" x 6-1/4"
  • Material: Durable Nylon
  • Mounting Type: Top Plate Mount

The Industrial Line Albion Casters are engineered for superior performance and durability, featuring robust Nylon wheels that offer smooth, silent rolling and resistance to abrasion. The 7-1/4" x 6-1/4" top plate ensures secure mounting, making them a reliable choice for various equipment and machinery. Whether you need to enhance the mobility of industrial carts or streamline equipment transport, these casters deliver both efficiency and strength.

Boost Your Equipment's Efficiency Today

Upgrade your industrial setup with the Industrial Line Albion Casters. Engineered for maximum durability and load-bearing capacity, these casters are designed to meet the demands of tough environments. Order now to experience the difference in performance and reliability.

Search