Blickle Industrial Replacement Wheels · 3-1/8" to 10" · 220 to 3,300 lb per Wheel

Diameter: 3-1/8 to 10 inTread: 1-1/4, 1-7/16 and 2 inCapacity: 220 to 3,300 lb per wheel

Industrial replacement wheels in nylon, polyurethane, phenolic and rubber. Nylon is the most common tread here, rated 220 to 3,300 lb per wheel in 3-1/8 to 10 in. Other treads: polyurethane 240 to 1,550 lb, phenolic 800 to 1,400 lb and rubber 600 lb. Complete casters are listed too, rated 1,760 lb each. Brands: Blickle.

Shop by wheel type

8 types

Wheel = wheel diameter · capacity is per wheel.

Industrial replacement wheels by tread

Tread	Core	Wheel sizes	Rated per wheel	Listed temperature	Where it fits
Nylon		3-1/8 to 10 in	220 to 3,300 lb	-40°F to 250°F	low rolling effort on smooth floors, handles wet areas
Polyurethane	Cast iron	5, 6, 6-5/16 and 8 in	240 to 1,550 lb	-13°F to 158°F	quiet, floor-friendly and long wearing
Phenolic		4, 5, 6 and 8 in	800 to 1,400 lb	Up to 250°F	hard and easy rolling on smooth, dry floors
Rubber	Cast iron	8 in	600 lb		cushioned and quiet on finished floors
Cast iron		8 in	1,400 lb		heat, chips and heavy loads on rough floors

Ratings are for single wheels of industrial replacement wheels, from product fields [S1].

Wheel sizes

Wheel	Treads	Rated
3-1/8 x 1-7/16 in	nylon	350 to 770 lb
3-1/2 x 1-1/4 in	nylon	300 to 330 lb
4 x 1-7/16 in	nylon	615 to 1,100 lb
5 x 2 in	nylon and phenolic	1,000 to 1,650 lb
6 x 2 in	nylon, phenolic and polyurethane	880 to 1,760 lb
6 x 2-1/8 in	polyurethane	240 to 1,100 lb
6-5/16 x 2 in	nylon and polyurethane	990 to 1,870 lb
8 x 2 in	nylon, polyurethane and rubber	600 to 3,300 lb

Choosing industrial replacement wheels

Load: plan on three wheels carrying a four-wheel cart [S2]; at 1,400 lb each, a common rating here, that is about 4,200 lb, and the 3,300 lb top rating covers about 9,900 lb.
Floor: on industrial replacement wheels, polyurethane and rubber are kinder to tile and finished floors; nylon, phenolic and cast iron roll easier under heavy loads on smooth concrete.

Replacement wheel questions

What wheels are on this page?

Blickle industrial replacement wheels in nylon, polyurethane, phenolic, rubber and cast iron, 3-1/8 to 10 in across. A few oak furniture dollies with TPR wheels also show here.

How much weight can each wheel carry?

The Blickle wheels here are rated 220 to 3,300 lb per wheel, and most fall between 615 and 1,500 lb.

How do I match a replacement wheel?

Match the diameter, tread width, axle or bore size and hub length, so the wheel fits between the fork legs. Each listing gives its bearing type: plain bore, roller bearing or ball bearing.

Nylon or polyurethane replacement wheels?

Nylon is hard and rolls easily on smooth concrete. Blickle Besthane polyurethane wheels are quieter and gentler on finished floors.

Can these wheels take heat?

Some nylon wheels here list up to 250°F. Check the temperature field on each listing before oven or hot-room use.

Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com

Sources

[S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
[S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters