10" x 3" Rubber on Cast Iron Industrial Replacement Wheel – 1,100 lb | CasterHQ

Wheel

10" x 3"

Capacity

1100 lbs

Full specs Spec sheet (PDF)

$109.00 USD

Save 30%+ vs big-box distributors

In Stock · Ships 1-2 Business Days

✉️ Email a Caster Solutions Expert (Mon–Fri 8–5 CST)

PO Net 30 ACH Tax-Exempt

Business Purchasing

Purchase orders accepted for approved accounts
Net 30 terms for qualified businesses
ACH, credit card, and tax-exempt ordering
Bulk and contract pricing on fleet quantities

Upload a PO / Quote·Request bulk pricing·844-439-4335

Not sure this is the right spec? Jordan (Founder) and Bob (45+ years in casters) review applications before you order.

Call now

Product Overview

At a glance

Load capacity1100 lbs

Wheel10" × 3" Rubber

Temperature-40°F to 180°F

Caster HQ's 10" diameter by 3" tread width Mold-on-Rubber caster wheels have soft rubber tires molded onto iron centers. Soft rubber provides more desirable operating characteristics than any other wheel material. It is quiet, absorbs shock (prolonging equipment life and protecting cargo), can roll over small objects, protects costly floor surfaces, and minimizes vibration. The Conventional Moldon rubber caster wheel falls short of perfection in its limitation under load - it does not roll easily. Load capacity ratings do not take into account the effort required to manually move a load (drawbar pull measured in pounds). If cargo is to be moved manually on Conventional Moldon rubber caster wheels, reduce capacity ratings by 50% and select the largest practical wheel diameter. These caster wheels should not be left standing under load for extended periods as the tires may take a permanent "set" or develop flat spots. They can be used on almost any dry factory floor. The bonding agent which holds the rubber tire to its iron center can be affected by exposure to some chemicals, impact, overloading, and the buildup of heat. Tire hardness is 65 to 75 Durometer, Shore A. Temperature range is -20Â° to 159Â° F.

Key Features

Rubber tread vulcanized to heavy duty cast iron core.
Offers shock absorbing semi-cushioned ride, rolls easily over small debris, rough floors, cracks, floor joints, etc.
Provides good floor protection and quiet rolling operation.
Economically priced cushion wheel.
Works well in outdoor environments; however cast iron core can rust; if this is an issue look at using aluminum or plastic core wheels.
Black rubber tread can mark
Durometer: 80 Shore A (+/-5).
Temperature range: -40Â° F to 180Â° F.

Ordering & Shipping Information

Order processing

In stock. Orders placed before 12pm CT (Mon–Fri) typically ship the same or next business day from our Mansfield, TX warehouse.

Shipping method

Because of its size and weight, this item typically ships LTL freight on a pallet. Smaller add-on items may ship parcel. Freight cost is calculated by destination and shown before payment, or quoted for large orders.

Payment & procurement terms

Purchase orders — accepted from approved accounts

Net 30 terms — available on approved credit

ACH & all major cards — Visa, MC, Amex, Discover

Tax-exempt — submit your resale/exemption certificate

New to CasterHQ? Open an account or request terms and send your resale or tax-exemption certificate before ordering so it is applied at checkout.

Volume pricing & quotes

Quantity discounts apply automatically — no codes needed. For large, recurring, or custom requirements, request a bulk quote and our team will confirm pricing, lead time, and total landed freight upfront.

Returns & warranty

Stock items carry a 30-day return policy in unused, resalable condition. Made-to-order and custom items are non-returnable once production starts. All products carry the manufacturer's warranty against defects.

Typical transit times after shipment

Central & Southern U.S.: typically 1–2 business days
East & West Coasts: typically 2–3 business days
Remote areas and freight deliveries may take longer.

Need an exact freight quote or blanket PO?

For pallet freight, scheduled releases, or blanket purchase orders, contact our team and we'll confirm total landed cost before you commit. Direct line: 844-439-4335.

Frequently Asked Questions

What is the load capacity of this wheel?+

This 10" x 3" Rubber on Cast Iron Industrial Replacement Wheel – 1,100 lb is rated to 1100 lbs per wheel. Divide the total load across the number of wheels in your rig and keep working loads within about 75-80% of the rating for continuous use.

What wheel material is this, and where does it perform best?+

This is a Rubber wheel. Rubber absorbs shock and protects floors, and runs quietly, which suits noise-sensitive and light-to-medium duty use.

What are the wheel dimensions and bore?+

10" diameter x 3" tread width. Verify your axle diameter and hub/bore length against your existing wheel before ordering.

Can this wheel be supplied in a caster rig?+

Yes. Most wheels can be paired with a swivel or rigid rig to build a complete caster. Tell us your mount and load and we will spec the rig - request it on our bulk pricing page.

What temperature range is it rated for?+

Rated for -40°F to 180°F. Operating outside the rated range can shorten wheel life and reduce capacity.

How do I order, and what are the terms?+

We accept purchase orders and offer Net 30 on approved accounts, ACH, and all major cards, plus tax-exempt ordering with a resale or exemption certificate. Volume discounts apply automatically; request a bulk quote for large or recurring orders. Stock items carry a 30-day return policy in unused condition (made-to-order items are non-returnable once production starts).

10" x 3" Rubber on Cast Iron Industrial Replacement Wheel – 1,100 lb | CasterHQ

$109.00

Technical Specifications

Dimensions & Mounting
Wheel Diameter	10"
Wheel Tread Width	3"
Load & Performance
Wheel Capacity	1100 lbs
Temp Range	-40°F to 180°F
Materials & Finish
Wheel Material	Rubber
Wheel Core Material	Iron
Frame Material	Zinc Plated Steel

Reference Dimensions

Wheel10" x 3"

Wheel MaterialRubber

Illustrative wheel profile drawn to this item's proportions — dimensions are manufacturer specification values. Confirm against the technical table before ordering.

Compare Similar

10" x 3" Semi-Pneumatic Rigid Caster with Brake – 650 lb | CasterHQ 10" x 3" · 650 lbs $72

10" x 3" Semi-Pneumatic Swivel Caster – 650 lb | CasterHQ 10" x 3" · 650 lbs $80

10" x 3" Semi-Pneumatic Swivel Caster with Brake – 650 lb | CasterHQ 10" x 3" · 650 lbs $90 View all 10′ x 3′ casters →

Will This Caster Handle Your Load?

Enter your loaded weight — we derate to 3 effective casters on a 4-caster rig, per industry practice for uneven floors.

Rated capacity: 1100 lbs per caster. For dynamic loads, towing, or debris-strewn floors, apply additional safety factor · full engineering tools →

Documentation

Spec sheet (PDF) 30-day pricing honored Request STEP / CAD fileour engineers email it same day Caster selection guide Caster University Fleet & contract pricing Net 30 available

30-day returns · manufacturer warranty · spec support: 844-439-4335 (Mon–Fri 8–5 CST)

Compare Similar Casters

View all casters 676-1,250 lb per caster · the industrial workhorse tier →

Your selection is highlighted. Every option shares its wheel size and mount; a Direct fit tag means the same mounting plate — a drop-in replacement. Step up or down in load rating, all in-stock.

Casters (in stock)	Load capacity	Wheel	Type	Overall height	Price
10" x 3" Semi-Pneumatic Swivel Caster – 650 lb	650 lbsLighter duty	10" × 3"	Swivel	12-3/16"	$80.00	View →
10" x 3" Semi-Pneumatic Swivel Caster with Brake – 650 lb	650 lbsLighter duty	10" × 3"	Swivel with Brake + brake	12-3/16"	$90.00	View →
This item10" x 3" Rubber on Cast Iron Industrial Replacement Wheel – 1,100 lb	1100 lbs	10" × 3"Rubber	—	—	$109.00	Viewing
10" x 3" Polyurethane Polyolefin Industrial Wheel – 1650 lb	1650 lbsHeavier duty	10" × 3"Polyurethane	—	—	Request quote	View →
Hamilton R-SECK-13HMB 10" x 3" Metal Rigid Caster – 2080 lb	2080 lbsHeavier duty	10" × 3"Cast Iron	Rigid	—	$439.00	View →