Back to Casters

4 inch polyurethane wheel plate casters

These 4 in polyurethane plate casters fit shop carts, equipment, and material handling carts that move heavier loads. Casters in this collection range from 700 to 1,000 lb per caster. Wheels are 4 x 2 in swivel, rigid, and brake models. Sets of 4 show the combined set rating on the title, so divide by 4 for the per caster load. Polyurethane (poly or urethane) on iron protects floors and keeps rolling effort low under load. Softer polyurethane or soft rubber or TPR tread is the better pick when the floor has chips or grit. Match the 4 x 4-1/2 in plate, bolt pattern, and overall height before you order. Choose swivel casters when the cart must turn in place, rigid casters for straight travel, and add a brake when the cart needs to stay put. Read the listing for the exact wheel size, overall height, and mount shown. Poly on iron aisle: polyurethane on iron casters. Plate aisle: plate casters.

4 inch polyurethane wheel plate casters by tread

Tread Core Wheel sizes Rated per caster Listed temperature Where it fits
Polyurethane Cast iron 4 in 700 to 4,000 lb Up to 180°F quiet, floor-friendly and long wearing
Phenolic 4 in 800 lb Up to 250°F hard and easy rolling on smooth, dry floors
Ductile iron Steel 5 in 1,500 lb -45°F to 800°F heavy loads with better impact strength than cast iron

Ratings are for single casters of 4 inch polyurethane wheel plate casters, from product fields [S1].

Wheel sizes

Wheel Treads Rated
4 x 2 in polyurethane and phenolic 700 to 4,000 lb
5 x 2 in ductile iron 1,500 lb

Choosing 4 inch polyurethane wheel plate casters

  1. Load: divide the loaded weight by three for a four-caster cart [S2]. Among 4 inch polyurethane wheel plate casters, a 1,000 lb caster then suits about 3,000 lb, and the strongest at 4,000 lb about 12,000 lb.
  2. Mount: most 4 inch polyurethane wheel plate casters use a 4 x 4-1/2 in top plate; 4-1/2 x 6-1/4 in plates are listed too; measure bolt hole centers on the old plate and compare.
  3. Floor: on 4 inch polyurethane wheel plate casters, polyurethane is kinder to tile and finished floors; phenolic and ductile iron roll easier under heavy loads on smooth concrete.
  4. Rig: swivel and rigid 4 inch polyurethane wheel plate casters are listed, with total lock brake and side lock brake options.
  5. Heat: among 4 inch polyurethane wheel plate casters, the highest listed range is -45°F to 800°F on ductile iron; check the temperature field on each listing before oven or hot-room use.

4 inch polyurethane wheel plate casters questions

How much weight can 4 inch polyurethane wheel plate casters carry?

Single 4 inch polyurethane wheel plate casters are rated 700 to 4,000 lb; most fall between 700 and 1,000 lb.

What top plate do 4 inch polyurethane wheel plate casters use?

Most 4 inch polyurethane wheel plate casters use 4 x 4-1/2 in. Other plates on 4 inch polyurethane wheel plate casters: 4-1/2 x 6-1/4 in.

What wheel material is most common on 4 inch polyurethane wheel plate casters?

Polyurethane leads on 4 inch polyurethane wheel plate casters, rated 700 to 4,000 lb per caster. Among 4 inch polyurethane wheel plate casters, phenolic is next at 800 lb.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

Search