Up to 350 lbs
Up to 7,000 lbs
Up to 16,000 lbs
Up to 40,000 lbs
Shock absorbing
Outdoor / rough terrain
View All Specialty Casters
Browse all specialty caster types
All measurements indicate the wheel diameter by the tread width.
The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.
W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.
Plate dimensions shown are overall mounting plate size.
When replacing existing casters, select the closest plate size and verify bolt-hole compatibility.
BHP = Bolt Hole Pattern, shown under each plate.
Wheel = wheel diameter · capacity is per caster.
























| Tread | Core | Wheel sizes | Rated per caster | Listed temperature | Where it fits |
|---|---|---|---|---|---|
| Polyurethane | Polyolefin and Steel | 4, 5, 6 and 8 in | 600 to 1,200 lb | -30°F to 140°F | quiet, floor-friendly and long wearing |
| TPR | Polyolefin | 4, 5, 6 and 8 in | 350 to 1,000 lb | -30°F to 140°F | non-marking, quiet on finished floors |
| Rubber | Pneumatic and Steel | 5, 6, 8 and 10 in | 300 to 1,200 lb | -30°F to 130°F | cushioned and quiet on finished floors |
| Phenolic | 4, 5, 6 and 8 in | 500 to 1,200 lb | -30°F to 195°F | hard and easy rolling on smooth, dry floors | |
| Polyolefin | 5, 6 and 8 in | 340 to 800 lb | -30°F to 140°F | wet and chemical areas, light to medium loads | |
| Epoxy resin | 4, 5, 6 and 8 in | 300 to 1,000 lb | -20°F to 475°F | oven racks | |
| Nylon | 5, 6 and 8 in | 800 to 1,200 lb | -70°F to 515°F | low rolling effort on smooth floors, handles wet areas |
Ratings are for single casters of P&H 40 series casters, from product fields [S1].
| Wheel | Treads | Rated |
|---|---|---|
| 4 x 2 in | polyurethane, phenolic and TPR | 300 to 800 lb |
| 5 x 2 in | polyurethane, TPR and phenolic | 300 to 1,000 lb |
| 6 x 1-1/4 in | TPR | 350 lb |
| 6 x 2 in | polyurethane, TPR and phenolic | 250 to 1,200 lb |
| 8 x 1-3/4 in | rubber | 350 to 500 lb |
| 8 x 2 in | polyurethane, TPR and rubber | 350 to 1,400 lb |
| 10 x 2 in | rubber | 1,000 to 1,200 lb |
| 10 x 2-1/2 in | rubber | 500 lb |
Related to P&H 40 series casters: 6 x 2 in polyurethane wheels and 6 x 2 in polyurethane casters.
Single P&H 40 series casters are rated 300 to 1,200 lb; most fall between 500 and 1,000 lb.
Most P&H 40 series casters use 4 x 4-1/2 in.
Polyurethane leads on P&H 40 series casters, rated 600 to 1,200 lb per caster. Among P&H 40 series casters, tpr is next at 350 to 1,000 lb.
Yes. Wheel-only listings for P&H 40 series casters are here, sized 5, 6 and 8 in; measure bore and hub length before you order.
Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com
Search
