Up to 350 lbs
Up to 7,000 lbs
Up to 16,000 lbs
Up to 40,000 lbs
Shock absorbing
Outdoor / rough terrain
View All Specialty Casters
Browse all specialty caster types
All measurements indicate the wheel diameter by the tread width.
The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.
W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.
Plate dimensions shown are overall mounting plate size.
When replacing existing casters, select the closest plate size and verify bolt-hole compatibility.
BHP = Bolt Hole Pattern, shown under each plate.
Rubber and polyurethane favor floor protection; phenolic and steel favor heavy capacity. Compare materials →
























8 x 2 in casters and wheels in polyurethane, nylon, phenolic, rubber and cast iron. The larger wheel rolls over seams and dock plates with less effort. Most are rated 900 to 1,500 lb per caster.
| Type | Per unit | Notes |
|---|---|---|
| Complete 8 x 2 casters | About 210 to 3,200 lb | Most cart work |
| Bare 8 x 2 wheels | About 400 to 16,000 lb | Hamilton stainless / Duralast highs |
Admin ACTIVE scan 8-x-2-casters-wheels, October 26, 2026: casters 210 to 3,200; wheels to 16,000 [S1].
Complete caster titles top out about 3,200 lb each. Bare wheels can list much higher with no yoke rating. Use the number on the listing you buy.
8 x 2 rolls over debris easier and often carries more. 6 x 2 is lower and common on the same 4 x 4-1/2 in plate family.
Jordan Wilson, CasterHQ · reviewed October 26, 2026 · 844-439-4335 · info@casterhq.com
Search
