Back to Casters

V-Groove Wheel

These v-groove wheels and casters ride inverted angle track or guide rails instead of a flat floor. Casters in this collection range from about 800 to 2,800 lb per caster. Wheel diameters run about 4 to 8 in in cast iron, mostly on a 4 x 4-1/2 in top plate. Albion v-groove builds are listed here for gates, machines, and fixtures that must stay on a track. Match the groove to your rail size and confirm overall height with the load on the track. Swivel and rigid plates are both listed so you can steer or lock a straight run. Cast iron is the hard, high-capacity tread stocked on this page. Match plate size and groove width before you place your order today. Capacities below are per caster unless a listing says set. Sliding gate and v-track rollers: sliding gate wheels. Brand aisle: Albion casters.

Shop by type

2 types

Wheel = wheel diameter · capacity is per caster.

Albion v-groove wheel by tread

Tread Core Wheel sizes Rated per caster Listed temperature Where it fits
Cast iron 4, 5, 6 and 8 in 800 to 2,800 lb Up to 350°F heat, chips and heavy loads on rough floors

Ratings are for single casters of Albion v-groove wheel, from product fields [S1].

Wheel sizes

Wheel Treads Rated
4 x 2 in cast iron 800 lb
5 x 2 in cast iron 800 lb
6 x 2 in cast iron 1,000 lb
6 x 3 in cast iron 2,800 lb
8 x 3 in cast iron 2,800 lb

Choosing Albion v-groove wheel

  1. Load: divide the loaded weight by three for a four-caster cart [S2]; at 2,800 lb each, Albion v-groove wheel suit a loaded cart of about 8,400 lb.
  2. Mount: most Albion v-groove wheel use a 4 x 4-1/2 in top plate; match the bolt holes on your frame to the plate before ordering.
  3. Floor: on Albion v-groove wheel, cast iron suits smooth concrete and heavy loads, but is loud and hard on tile and wood.
  4. Rig: swivel and rigid Albion v-groove wheel are listed.
  5. Heat: among Albion v-groove wheel, the highest listed range is up to 350°F on cast iron; check the temperature field on each listing before oven or hot-room use.

Albion v-groove wheel questions

How much weight can Albion v-groove wheel carry?

Single Albion v-groove wheel are rated 800 to 2,800 lb; most fall between 800 and 2,800 lb.

What top plate do Albion v-groove wheel use?

Most Albion v-groove wheel use 4 x 4-1/2 in.

What wheel material is most common on Albion v-groove wheel?

Cast iron leads on Albion v-groove wheel, rated 800 to 2,800 lb per caster.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

Search