Up to 350 lbs
Up to 7,000 lbs
Up to 16,000 lbs
Up to 40,000 lbs
Shock absorbing
Outdoor / rough terrain
View All Specialty Casters
Browse all specialty caster types
All measurements indicate the wheel diameter by the tread width.
The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.
W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.
Plate dimensions shown are overall mounting plate size.
When replacing existing casters, select the closest plate size and verify bolt-hole compatibility.
BHP = Bolt Hole Pattern, shown under each plate.
Specialty Casters
Gate Casters
BBQ Pit & Smoker Casters
Keyed Drive Wheels
Drywall Cart Casters
Skid Wheels & Casters for RVs
Leveling Casters
Shopping Cart Wheels & Casters
Band Equipment Casters & Wheels
Low Profile Casters
Cart Wheels & Casters
Toolbox Caster Sets
Bakery & High Temperature Casters
Kitchen Prep Table Caster Sets
Wire Shelving Casters
Silent Glide Casters
Find the exact replacement caster for your Beverage-Air reach-in refrigerators and freezers, undercounter and worktop units, back-bar coolers, EF/ER/HF series, and STF milk coolers. Match the Beverage-Air factory caster across every size and mount — 1/2"-13 stem (phenolic, nylon, polyolefin) for reach-in, undercounter, and worktop units, and standard 2-3/8" × 3-5/8" plate casters from 3" to 6" for plate-mount and STF units. Cross-referenced to the Bev-Air part it replaces.






It depends on the line. Reach-ins use a 3" phenolic or nylon 1/2"-13 stem (401-634A, 401-695B). The EF/ER/HF series use a 5" polyolefin stem (401-275A / 61C01-001A). Undercounter and worktop units (BB, DD, UCR, UCF) use a low 3" plate caster. STF milk coolers use a 5" plate (401-209A). Type your model above or send it to confirm.
On stem units, yes — same 1/2"-13 thread, no drilling. On plate units, the standard 2-3/8" × 3-5/8" plate matches Beverage-Air's standard plate; measure your old caster's plate to confirm before ordering.
Yes. The 5" stem set ships 2 swivel + 2 total-lock; the stem singles take a bolt-on total-lock brake; the 5" plate caster has a brake version (AVF-FRY5-CSTR-TLB); and the 2" stem comes in swivel and brake.
In-stock casters ship from Mansfield, TX in 1 to 2 business days.
Beverage-Air® is a registered trademark of Beverage-Air, an Ali Group company. CasterHQ is not affiliated with, authorized, or endorsed by Beverage-Air. Casters shown are compatible aftermarket replacements, engineered to fit by spec — not OEM parts.
Related: food service equipment casters by brand, food service casters, OEM caster cross-reference, selection guide.
Search

