Durastar Phenolic Wheels - PH & TPH

This collection holds Durastar Phenolic Wheels Ph Tph with phenolic treads, made to replace worn wheels on carts, dollies, racks, and equipment. Wheels in this collection range from 200 to 3,500 lb per wheel. Wheels in this category range from 3 up to 12 inches in diameter with 1-1/4 to 3 in tread widths. Phenolic rolls easily on smooth floors and handles dry heat, oil, and grease, but it is not made for water or washdown. It suits warehouse carts, toolboxes, and tool carts, and it is loud on rough floors. Match the bore, hub length, diameter, and tread width before you order. Order the axle and spacers if the old ones are worn. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Phenolic aisle: phenolic casters. Caster hub: heavy duty casters.

Shop by wheel type

2 types

Wheel = wheel diameter · capacity is per wheel.

Durastar phenolic wheels P&H & TPH by tread

Tread	Core	Wheel sizes	Rated per wheel	Listed temperature	Where it fits
Phenolic		3 to 12 in	400 to 3,500 lb	Up to 250°F	hard and easy rolling on smooth, dry floors
High-temp phenolic	Phenolic	3 to 12 in	200 to 2,600 lb	Up to 250°F	oven and hot-room carts

Ratings are for single wheels of Durastar phenolic wheels P&H & TPH, from product fields [S1].

Wheel sizes

Wheel	Treads	Rated
3 x 1-1/4 in	high-temp phenolic and phenolic	200 to 400 lb
4 x 2 in	high-temp phenolic and phenolic	600 to 800 lb
5 x 1-1/4 in	high-temp phenolic and phenolic	300 to 400 lb
5 x 2 in	high-temp phenolic and phenolic	750 to 1,000 lb
6 x 2 in	high-temp phenolic and phenolic	900 to 1,200 lb
6 x 3 in	high-temp phenolic and phenolic	1,700 to 2,000 lb
8 x 2 in	high-temp phenolic and phenolic	1,100 to 1,400 lb
8 x 3 in	phenolic and high-temp phenolic	1,900 to 2,900 lb

Choosing Durastar phenolic wheels P&H & TPH

Load: divide the loaded weight by three for a four-wheel cart [S2]. Among Durastar phenolic wheels P&H & TPH, a 2,000 lb wheel then suits about 6,000 lb, and the strongest at 3,500 lb about 10,500 lb.
Floor: on Durastar phenolic wheels P&H & TPH, phenolic and high-temp phenolic suit smooth concrete and heavy loads, but are loud and hard on tile and wood.
Rig: swivel Durastar phenolic wheels P&H & TPH are listed.

Related to Durastar phenolic wheels P&H & TPH: caster wheels, P&H and TPH.

Durastar phenolic wheels P&H & TPH questions

How much weight can Durastar phenolic wheels P&H & TPH carry?

Single Durastar phenolic wheels P&H & TPH are rated 200 to 3,500 lb; most fall between 600 and 2,000 lb.

What wheel material is most common on Durastar phenolic wheels P&H & TPH?

Phenolic leads on Durastar phenolic wheels P&H & TPH, rated 400 to 3,500 lb per wheel. Among Durastar phenolic wheels P&H & TPH, high-temp phenolic is next at 200 to 2,600 lb.

Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com

Sources

[S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
[S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters