Back to Casters

Hudson Bearings Ball Transfers

This collection holds Hudson Bearings casters with metal and nylon wheels, built for shop carts, equipment, and material handling carts that move heavier loads. Casters in this collection range from 40 to 850 lb per caster. Flanged and V groove track wheels ride on rail or angle iron track for straight line travel. Metal wheels roll with low effort and handle debris and heat. They are loud and can mark finished floors. Nylon rolls easily, resists water and many chemicals, and is hard, so it is loud on rough floors. Match plate size, bolt pattern, and overall height before you order. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Check the floor type and the heaviest load the cart will carry before you choose. Forged steel aisle: forged steel casters. Wheel hub: replacement wheels.

Shop by type

5 types

Wheel = wheel diameter · capacity is per caster.

Series at a glance

Series Style Ball Ball material Rating
SBT, BT, LPBT and FSBT Drop-in, low profile or flanged 5/8 to 1-1/2 in Stainless or carbon steel 40 to 275 lb
MBT and SMBT Mid-size drop-in 5/8 and 1 in Stainless or carbon steel 125 to 200 lb
N-prefix series (NSBT, NFSBT, NMBT, NPBT) Same housings with nylon balls 5/8 to 1-1/2 in Nylon 40 to 250 lb
HDBT, HDBTM, SHDBT, FHDBTM Heavy duty, air cargo 1-3/16 in Stainless ball, steel or aluminum housing 550 to 850 lb

From product titles and listings [S1]. Series codes follow the Hudson part numbers.

Choosing a ball transfer

  1. Load: spread the load over at least three units in contact; a 300 lb load on three 1 in units needs 100 lb each or more.
  2. Ball: nylon balls are quiet and will not mark finished parts; stainless resists washdown; carbon steel costs less in dry areas.
  3. Mount: drop-in units sit in a bored hole, flanged units bolt through a flange, and stud units thread into a tapped hole.

Hudson ball transfer questions

What load ratings do Hudson ball transfers have?

From 40 lb on 5/8 in units up to 850 lb on the 1-3/16 in HDBT and HDBTM air cargo series.

Nylon or steel ball?

Nylon is quiet and gentle on finished parts; stainless or carbon steel balls carry more and suit heavier work.

Which Hudson series is for air cargo?

The HDBT and HDBTM series with 1-3/16 in stainless balls, rated 550 to 850 lb.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.

Search