Specialty Casters
Gate Casters
BBQ Pit & Smoker Casters
Keyed Drive Wheels
Drywall Cart Casters
Skid Wheels & Casters for RVs
Leveling Casters
Shopping Cart Wheels & Casters
Band Equipment Casters & Wheels
Low Profile Casters
Cart Wheels & Casters
Toolbox Caster Sets
Bakery Oven Rack Casters
Kitchen Prep Table Caster Sets
Wire Shelving Casters
Silent Glide Casters
Built for drywall carts, sheetrock dollies and panel carts, this set of four 8" x 2" swivel plate casters pairs gray non-marking thermoplastic rubber (TPR) wheels with heavy-duty 4" x 4-1/2" top plates. Each caster is rated for 700 lb, giving the set a combined 2,800 lb capacity. Two bolt-on 4-position swivel locks are included, so you can lock either pair of casters straight for tracking down long hallways, then release them for tight turns on the jobsite.
These casters fit most standard drywall cart frames, including carts made by Apapa and Jescraft. Always confirm mounting dimensions and total cart load requirements before installation. See more drywall cart casters.
| Specification | Value |
|---|---|
| Model | CB8X2SDWC4 |
| Wheel Diameter | 8" |
| Tread Width | 2" |
| Wheel Material | Gray non-marking thermoplastic rubber (TPR) |
| Wheel Core Material | Polyolefin |
| Wheel Durometer | 75 Shore A (+/-5) |
| Tread Profile | Crown (round) tread |
| Wheel Bearing | 3/4" roller bearing with a 1/2" ID spanner |
| Axles | Zerk (grease) fittings |
| Capacity (per caster) | 700 lb |
| Capacity (set of 4) | 2,800 lb |
| Overall Height | 9-1/2" |
| Swivel Radius | 6-1/4" |
| Top Plate Size | 4" x 4-1/2" |
| Bolt Hole Pattern | 2-5/8" x 3-5/8" slotted to 3" x 3" |
| Rig Type | Swivel, with 2 bolt-on 4-position swivel locks included |
| Wheel Brake | No brake |
| Frame Material | Zinc plated steel |
| Set Weight | Approx. 24.4 lb |
Mounting hardware is not included. Made in USA.
This set is commonly used on drywall carts and material dollies where smooth rolling and controlled steering are required. The swivel assembly improves maneuverability in narrow aisles, loading zones and jobsite layouts. The two included swivel locks let you lock a pair of casters for straight-line tracking when moving long sheets down hallways.
Suitable for use on:
Always confirm the 4" x 4-1/2" top plate and 2-5/8" x 3-5/8" slotted to 3" x 3" bolt hole pattern against your cart before ordering.
The thermoplastic rubber wheel is engineered to balance load capacity and surface protection:
This set is available for project and fleet orders. Contact us for volume pricing or configuration support.
Each caster is rated for 700 lb, and the set is rated for 2,800 lb. Total cart capacity depends on proper load distribution and the strength of the cart frame.
Yes. These casters are designed for drywall carts, drywall dollies and sheetrock handling equipment, and they fit many standard frames including Apapa and Jescraft. Confirm the plate size and bolt pattern before installation.
The thermoplastic rubber tread is designed to reduce floor marking and provide quieter operation compared to hard wheels.
Yes. Each caster swivels a full 360 degrees. Two bolt-on 4-position swivel locks are included so you can lock a pair straight for tracking, then release them for tight turns.
Each wheel has a 3/4" roller bearing with a 1/2" ID spanner inside the wheel. The axles have zerk grease fittings.
No. Mounting hardware is not included. The top plate is 4" x 4-1/2" with a 2-5/8" x 3-5/8" bolt hole pattern slotted to 3" x 3".
Two bolt-on, 4-position swivel locks are included so you can lock a pair of casters straight for tracking, then release them for tight turns.
Each caster offers full rotation for maneuverability in confined jobsite and warehouse spaces.
Rated 700 lb per caster and 2,800 lb for the set of 4, for heavy-duty drywall cart use.
Gray non-marking thermoplastic rubber wheels with a crown (round) tread roll quietly and help protect finished floors.
Each wheel has a 3/4" roller bearing with a 1/2" ID spanner inside the wheel. The axles have zerk grease fittings.
Zinc plated steel rig with a polyolefin wheel core and 75 Shore A (+/-5) crown (round) TPR tread.
Order processing
In stock. Orders placed before 12pm CT (Mon–Fri) typically ship the same or next business day from our Mansfield, TX warehouse.
Shipping method
Because of its size and weight, this item typically ships LTL freight on a pallet. Smaller add-on items may ship parcel. Freight cost is calculated by destination and shown before payment, or quoted for large orders.
Payment & procurement terms
New to CasterHQ? Open an account or request terms and send your resale or tax-exemption certificate before ordering so it is applied at checkout.
Volume pricing & quotes
Quantity discounts apply automatically — no codes needed. For large, recurring, or custom requirements, request a bulk quote and our team will confirm pricing, lead time, and total landed freight upfront.
Returns & warranty
Stock items carry a 30-day return policy in unused, resalable condition. Made-to-order and custom items are non-returnable once production starts. All products carry the manufacturer's warranty against defects.
Central & Southern U.S.: typically 1–2 business days
East & West Coasts: typically 2–3 business days
Remote areas and freight deliveries may take longer.
For pallet freight, scheduled releases, or blanket purchase orders, contact our team and we'll confirm total landed cost before you commit. Direct line: 844-439-4335.
This 8" x 2" TPR Swivel Drywall Cart Caster Set of 4 with 2 Swivel Locks – 2,800 lb is rated to 700 lbs per caster. Size a set by dividing the total load by the number of casters, and for uneven floors assume 3 of 4 casters carry the load. Keep continuous-use loads within about 75-80% of the rating.
This caster runs a Gray Rubber wheel with a 2" tread width. Rubber absorbs shock and protects floors, and runs quietly, which suits noise-sensitive and light-to-medium duty use.
This caster uses a top-plate mount with a 4" x 4-1/2" plate and a 2-5/8" x 3-5/8" slotted to 3" x 3" bolt pattern. Measure your existing mounting holes before ordering; if you are replacing casters, match the bolt pattern - most standard patterns interchange across brands.
This is a Swivel caster. Swivel casters rotate 360 degrees for full maneuverability. For most mobile equipment we recommend 2 swivel + 2 rigid, or 4 swivel with at least 2 brakes.
The Gray Rubber wheel performs best on rough, uneven, or outdoor surfaces such as asphalt, gravel, and cracked concrete. For non-marking or clean-environment needs, ask us about matching tread options.
The overall height (floor to top of plate or stem) is 9-1/2". Account for it when checking equipment clearance, dock height, and ergonomic working height.
We accept purchase orders and offer Net 30 on approved accounts, ACH, and all major cards, plus tax-exempt ordering with a resale or exemption certificate. Volume discounts apply automatically; request a bulk quote for large or recurring orders. Stock items carry a 30-day return policy in unused condition (made-to-order items are non-returnable once production starts).
$134.00
| Identification | |
|---|---|
| Part Number / SKU | CB8X2SDWC4 |
| Core | |
| Load Capacity | 700 lbs |
| Wheel Diameter | 8" |
| Wheel Width | 2" |
| Floor to top of mounting plate (or stem shoulder).Overall Height (OAH)Floor to top of mounting plate (or stem shoulder). | 9-1/2" |
| Rig Type | Swivel |
| Brake | No Brake |
| Distance from swivel centerline to the outer edge of the wheel when turned.Swivel RadiusDistance from swivel centerline to the outer edge of the wheel when turned. | 6-1/4" |
| Mounting | |
| Mount Style | Plate |
| Plate Size | 4" x 4-1/2" |
| Center-to-center spacing of the top-plate mounting holes.Bolt Hole Pattern (BHP)Center-to-center spacing of the top-plate mounting holes. | 2-5/8" x 3-5/8" slotted to 3" x 3" |
| Wheel | |
| Wheel Material | Gray Rubber |
| Wheel Core Material | Polyolefin |
| Wheel tread hardness. Shore D is hard; Shore A is softer.Durometer (Shore)Wheel tread hardness. Shore D is hard; Shore A is softer. | 75 Shore A ±5 |
| Bearing Type | Roller Bearing |
| Bearing Size | 3/4" |
| Construction | |
| Frame / Finish | Zinc Plated Steel |
| Grease Fitting | Zerk on axles |
Your selection is highlighted. Every option shares its wheel size and mount; a Direct fit tag means the same mounting plate — a drop-in replacement. Step up or down in load rating within the same duty class, all in stock.
| Casters (in stock) | Load capacity | Wheel | Type | Overall height | Price | |
|---|---|---|---|---|---|---|
| 600 lbsLighter duty | 8" × 2"Rubber | Swivel | 9-1/2" | $52.00 | View → | |
| 600 lbsLighter duty | 8" × 2"Rubber | — | 9-1/2" | $191.00 | View → | |
| 700 lbs | 8" × 2"Gray Rubber | Swivel | 9-1/2" | $134.00 | Viewing | |
| 700 lbsSame capacity | 8" × 2"Gray Rubber | Rigid | 9-1/2" | $30.00 | View → | |
| 700 lbsSame capacity | 8" × 2"Gray Rubber | Swivel | 9-1/2" | $32.50 | View → |
