Back to Casters

Albion low profile casters

This collection holds Low Profile casters with nylon, phenolic and semi steel wheels, built for heavy equipment, dies, molds, and plant carts that move very heavy loads. Casters in this collection range from 45 to 10,000 lb per caster. Wheels in this category range from 1 up to 6 inches in diameter with 3 to 4-1/2 in tread widths. The collection includes swivel, rigid, and brake models. Kingpinless swivels hold up better under shock and repeat loads. Dual wheel casters split the load over two wheels and swivel with less effort under heavy loads. Nylon rolls easily, resists water and many chemicals, and is hard, so it is loud on rough floors. Phenolic rolls easily on smooth floors and handles dry heat, oil, and grease, but it is not made for water or washdown. Choose swivel casters when the cart must turn in place and rigid casters for straight travel. Nylon aisle: nylon casters. Wheel hub: replacement wheels.

Shop by type

5 types

Wheel = wheel diameter · capacity is per caster.

Albion low profile casters by tread

Tread Core Wheel sizes Rated per caster Listed temperature Where it fits
Nylon 3 and 6 in 300 to 7,200 lb -40° to 250°F low rolling effort on smooth floors, handles wet areas
Phenolic 3 and 6-1/4 in 700 to 1,200 lb Up to 250°F hard and easy rolling on smooth, dry floors
Cast iron 3-1/4 and 4 in 800 to 2,000 lb Up to 800°F heat, chips and heavy loads on rough floors
Steel 6 in 8,000 to 10,000 lb Up to 800°F heavy loads and track
Polyolefin 1-7/16 in 300 lb wet and chemical areas, light to medium loads
Polyurethane 6 in 7,600 lb -40°F to 180°F quiet, floor-friendly and long wearing
Rubber Cast iron 6-1/4 in 500 lb cushioned and quiet on finished floors

Ratings are for single casters of Albion low profile casters, from product fields [S1].

Wheel sizes

Wheel Treads Rated
1-7/16 x 1-11/16 in polyolefin 300 lb
3 x 1-13/16 in nylon and phenolic 300 to 1,200 lb
3-1/4 x 4 in cast iron 2,000 lb
3-1/4 x 4-1/2 in cast iron 800 lb
4 x 4-1/2 in cast iron 1,200 lb
6 x 3 in steel, nylon and polyurethane 7,200 to 10,000 lb
6-1/4 x 4-1/2 in phenolic and rubber 500 to 1,200 lb

Choosing Albion low profile casters

  1. Load: plan on three casters carrying a four-caster cart [S2]; at 7,200 lb each, a common rating here, that is about 21,600 lb, and the 10,000 lb top rating covers about 30,000 lb.
  2. Mount: most Albion low profile casters use a 4-1/2 x 6-1/4 in top plate; 2-3/8 x 3-3/8 in and 6-1/4 x 7-1/2 in plates are listed too; match the bolt holes on your frame to the plate before ordering.
  3. Floor: on Albion low profile casters, polyurethane and rubber are kinder to tile and finished floors; nylon, phenolic, cast iron, steel and polyolefin roll easier under heavy loads on smooth concrete.
  4. Rig: swivel and rigid Albion low profile casters are listed, with side lock brake options.
  5. Heat: among Albion low profile casters, the highest listed range is up to 800°F on cast iron; check the temperature field on each listing before oven or hot-room use.

Albion low profile casters questions

How much weight can Albion low profile casters carry?

Single Albion low profile casters are rated 300 to 10,000 lb; most fall between 700 and 7,200 lb.

What top plate do Albion low profile casters use?

Most Albion low profile casters use 4-1/2 x 6-1/4 in. Other plates on Albion low profile casters: 2-3/8 x 3-3/8 in and 6-1/4 x 7-1/2 in.

What wheel material is most common on Albion low profile casters?

Nylon leads on Albion low profile casters, rated 300 to 7,200 lb per caster. Among Albion low profile casters, phenolic is next at 700 to 1,200 lb.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

Search