The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

PAN DOLLY CASTERS

Plate sizes: 3-1/8 x 4-1/8Bolt holes: 1-3/4 x 2-15/16 slotted to 2-3/8 x 3-3/8Diameter: 3 inTread: 1-1/4, 1-3/4 inCapacity: up to 500 lb

Match a 3-1/8 x 4-1/8 top plate when bolting casters under moving dollies and freight decks. Catalog chips cover wheel diameters 3 in, polyolefin treads, and capacities 300 to 500 lb. Softer treads quiet finished floors; harder compounds last longer on chips, heat, and rough concrete. Bring plate and stem measurements when replacing unmarked casters so the new corners sit level.

Shop by type

2 types

Wheel = wheel diameter · capacity is per caster.

BUN PAN DOLLY CASTERS

Maximize your efficiency when transporting your bun pans when stacked on your bun pan dollies. Bun pan Dolly Casters are great for carrying heavy loads, even up to 60 stacks of pans at a time on your dolly. These wheels are great for stationary storage if you need to leave your unused pans or excess pans stored on the dolly for long periods of times. Unlike other wheel materials, these wheels will not flat spot for long term storage. Whenever you need to move your pan dollys simply roll them out with easy using our high quality nylon or polyolefin caster wheels. These Pan Dolly Casters are great for regular use in high traffic bakeries and restaurants. Your floors will be protected by these non-marking casters, and the baker will truly appreciate the smooth roll-ability of these casters allowing the racks to be easily moved through a kitchen, restaurant, or bakery while navigating in tight spaces or around other racks and equipment. These casters are great for all bun pan dollies and commonly used in bakeries, hotels, restaurants, hospitals, diners, and commercial bakeries as well. These casters are a great upgrade for all Bun Pan Dollies.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

PAN DOLLY CASTERS

Shop by type

BUN PAN DOLLY CASTERS