Stevens SRT Appliance Hand Truck, 750 lb, Stair Climbing

The Stevens ESCORT SRT is a 750 lb all-steel appliance hand truck for everyday refrigerator, washer and range delivery on pavement and indoor floors. It is 60 in tall and 16 in wide, built from 3/4 in x 14 gauge steel tube, with 6 x 2 in cushion tread wheels, patented roller bearing stair crawlers, a ratchet strap with automatic recoil, and vinyl and felt padding. It weighs 51 lb, takes Stevens' BWA-S big wheel attachment, and is made in Augusta, Georgia.

Stevens SRT at a glance

• Load capacity750 lb
• Height x width60 x 16 in
• Frame3/4 in x 14 gauge steel tube
• Wheels6 x 2 in cushion tread rubber
• Footplate5 x 24 in, 9 gauge steel
• Truck weight51 lb

Jump to: full specifications · questions · what to expect

About the SRT

The SRT is Stevens' everyday all-steel ESCORT appliance truck. Dealers describe it as the model that takes the toughest punishment: 3/4 in x 14 gauge tubular steel, a 750 lb rating, 60 in tall and 16 in wide, on 6 x 2 in cushion tread rubber wheels with self-lubricating bushings.

It carries the full ESCORT kit: patented roller bearing crawler treads for stairs, a 3-ply, 2-piece, 14 ft strap with a ratchet tightener and automatic strap recoil, non-marking SNAPLOK vinyl bumpers and protective felt padding. It weighs 51 lb, and Stevens names it among its five best sellers.

How the SRT compares to other Stevens models

• SRT-8: 1 in frame tube, 8 x 2-1/2 in solid rubber wheels, 800 lb. Better on gravel and grass, $30.78 more at list.
• SRT-2R: Same truck with two straps and two ratchets for extra security on large loads; 55 lb on Stevens' price list.
• SRT-HD: Heavier-duty version on Stevens' price list; we can order it.
• MRT: Magnesium, 41 lb, rated 500 lb, for drivers who lift the truck all day.

SRT features and what they do for you

• All-steel frame. 3/4 in x 14 gauge steel tube stands up to liftgates, trailer floors and daily knocks.
• Cushion tread wheels. 6 x 2 in cushion tread rubber wheels roll quietly on finished floors and pavement and do not need air.
• ESCORT crawler treads. Roller bearing crawler treads carry the load over stair edges instead of bumping down each step.
• Auto-recoil ratchet strap. Ratchet the 14 ft strap tight, release it, and the strap winds itself back.
• Felt and vinyl padding. Protective felt plus non-marking SNAPLOK vinyl bumpers keep appliance finishes clean.
• Takes a big wheel attachment. Stevens' BWA-S fits its 3/4 in steel trucks, and the SRT is on the BWA-S parts cross-reference. Bolt it on for four-wheel support on lawns.

Who uses the SRT

• Appliance delivery and installation: Refrigerators, washers, dryers and ranges into homes and apartments.
• Appliance repair and parts depots: Moving units in and out of service bays.
• Property maintenance: Apartment turnovers and appliance swaps up and down stairwells.
• Warehouse and distribution: Boxed appliances and tall cartons between dock and staging.

How to use the SRT

1. Prep the load. Empty, tape and unplug the appliance. Remove doors from refrigerators only if the route needs it.
2. Load. Slide the footplate fully under the appliance with the uprights flat against the side or back.
3. Strap. Run the strap around the cabinet, hook it, and ratchet until the load cannot shift on the felt and vinyl.
4. Tip back. Foot on the axle, pull back to the balance point.
5. Stairs. Pull the truck up the stairs backward, crawlers on the step edges. Coming down, stay below the load and let the crawler belt slide each edge. Two people on heavy loads.
6. Unload. Stand it up, release the ratchet, let the strap recoil.

How ESCORT stair crawlers work

Behind each wheel is a crawler tread: an aluminum frame carrying a row of plastic roller bearings with a V-belt running over them. On flat ground the crawlers sit clear of the floor. On stairs, tip the truck to the balance point and the belt meets the step nosing. The belt rolls over the rollers, so the load glides from one step edge to the next instead of the wheels dropping off each tread.

Going up, the operator stands above the load, backs up the stairs and pulls. Going down, the operator stays below the load and lets the crawlers slide each edge while a helper steadies the top. Keep the strap tight and the load centered on the footplate the whole way.

What to expect from the SRT

Buyers of appliance and drum trucks most often mention these points in reviews. Here is how they apply to this model.

• The 6 in cushion tread wheels are made for floors, sidewalks and driveways. On gravel or grass they dig in; take the SRT-8 or add the BWA-S.
• At 51 lb it is a steel truck. Drivers who lift a truck into a van all day often choose the 41 lb MRT instead.
• It is a two-wheel truck, so you hold the load at the balance point. The BWA-S adds two wheels behind the load for long walks.
• The crawler treads make stairs controlled, not effortless. The operator still pulls or lowers the load one step at a time, so plan on a second person below the load on any stairs.
• A tight strap is what keeps an appliance on the truck. Ratchet it snug before you tip back, check it again at the top of the stairs, and replace a frayed or cut strap instead of knotting it.
• Stevens ships from Augusta, Georgia by FedEx in about 72 hours. It is not stocked in our Texas warehouse, so order ahead of the job.

Buying guidance

• Choose the SRT if most of your route is pavement and floors and your loads are under 750 lb.
• Move up to the SRT-8 for gravel, grass and broken pavement or loads up to 800 lb.
• Choose the SRT-2R if you want a second strap on tall, top-heavy loads.
• Add a BWA-S if you sometimes cross lawns or job sites and want four wheels under the load.

What's in the box

• One Stevens ESCORT SRT appliance hand truck with one 3-ply, 2-piece, 14 ft strap and auto-recoil ratchet.
• Not included: BWA-S big wheel attachment, strap extensions and the repair kit.

Care and maintenance

• Inspect the strap before every shift; replace it if it is cut, frayed or stiff with grease.
• Clean grit out of the crawler treads after wet or sandy jobs.
• Replace worn felt and torn vinyl before steel can touch an appliance.
• Check wheels for flat spots and the axle for play.
• If the ratchet slips or the strap stops recoiling, the ratchet assembly and recoil spring are sold separately.

Replacement parts

Stevens sells a repair kit for each model and individual parts from its parts list for every truck it builds. Send us the model number and the part you need and we will quote it. Call 844-439-4335.

Ordering and shipping

• Ships from Stevens. Stevens ships this item direct from Augusta, Georgia by FedEx, usually within 72 hours of your order, and emails tracking when it leaves. It is not stocked in our Mansfield, TX warehouse; allow about 72 hours plus FedEx transit.
• Shipping cost. Calculated at checkout from the shipping weight and your ZIP code.
• Your carrier account. Stevens can ship on your own UPS or FedEx account. Tell us the account number when you order.
• Fleet orders. Several trucks can ship together on a pallet; Stevens adds a small pallet charge. Ask for a quote.
• How to pay. Card, ACH, purchase order, and Net 30 for approved accounts. CasterHQ is BBB A+ rated.

About Stevens

Stevens Appliance Truck Company has built hand trucks in Augusta, Georgia since 1936 and describes itself as the oldest continuous hand truck maker in the United States. Every unit is built in Augusta with American-made components and labor.

The plant does its own CNC tube bending, press stamping, TIG and MIG welding and powder coating, then assembles and boxes each truck. Stevens builds more than 60 hand truck models and keeps a parts list for each one, so wear parts can be replaced instead of the whole truck.

Related: Stevens SRT-8, Stevens MRT, Stevens BWA-S, Stevens SRT-M-66. See every Stevens appliance truck.

Written by Jordan Wilson, CasterHQ · updated October 21, 2026 · 844-439-4335 · info@casterhq.com