Back to Casters

Polyurethane Kingpinless Casters

This collection holds Polyurethane Kingpinless Casters, built for heavy equipment, dies, molds, and plant carts that move very heavy loads. Casters in this collection range from 700 to 15,000 lb per caster. Wheels in this category range from 4 up to 18 inches in diameter with 2 to 9 in tread widths. The collection includes swivel, rigid, and brake models. Kingpinless swivels hold up better under shock and repeat loads. Dual wheel casters split the load over two wheels and swivel with less effort under heavy loads. Polyurethane (poly or urethane) treads are quiet, floor safe, and resist water and many chemicals. Nylon rolls easily, resists water and many chemicals, and is hard, so it is loud on rough floors. Metal wheels roll with low effort and handle debris and heat. They are loud and can mark finished floors. Choose swivel casters when the cart must turn in place and rigid casters for straight travel. Polyurethane aisle: polyurethane casters. Wheel hub: replacement wheels.

Shop by wheel material

2 types

Rubber and polyurethane favor floor protection; phenolic and steel favor heavy capacity. Compare materials →

Polyurethane kingpinless casters by tread

Tread Core Wheel sizes Rated per caster Listed temperature Where it fits
Polyurethane Cast iron and Aluminum 4 to 18 in 600 to 12,500 lb Up to 180°F quiet, floor-friendly and long wearing
Nylon 4, 5, 6 and 8 in 800 to 1,400 lb Up to 180°F low rolling effort on smooth floors, handles wet areas

Ratings are for single casters of polyurethane kingpinless casters, from product fields [S1].

Wheel sizes

Wheel Treads Rated
4 x 2 in polyurethane and nylon 450 to 1,200 lb
5 x 2 in polyurethane and nylon 600 to 1,500 lb
6 x 2 in polyurethane and nylon 900 to 1,800 lb
6 x 3 in polyurethane 2,400 to 7,600 lb
8 x 2 in polyurethane and nylon 1,000 to 2,000 lb
16 x 5 in polyurethane 9,700 lb
16 x 7 in polyurethane 8,200 to 9,800 lb
18 x 9 in polyurethane 12,500 to 15,000 lb

Choosing polyurethane kingpinless casters

  1. Load: divide the loaded weight by three for a four-caster cart [S2]. Among polyurethane kingpinless casters, a 2,000 lb caster then suits about 6,000 lb, and the strongest at 12,500 lb about 37,500 lb.
  2. Mount: most polyurethane kingpinless casters use a 4 x 4-1/2 in top plate; 8-1/2 x 8-1/2 in and 5-1/4 x 7-1/4 in plates are listed too; measure bolt hole centers on the old plate and compare.
  3. Floor: on polyurethane kingpinless casters, polyurethane is kinder to tile and finished floors; nylon rolls easier under heavy loads on smooth concrete.
  4. Rig: swivel and rigid polyurethane kingpinless casters are listed.

Polyurethane kingpinless casters questions

How much weight can polyurethane kingpinless casters carry?

Single polyurethane kingpinless casters are rated 600 to 12,500 lb; most fall between 1,000 and 2,000 lb.

What top plate do polyurethane kingpinless casters use?

Most polyurethane kingpinless casters use 4 x 4-1/2 in. Other plates on polyurethane kingpinless casters: 8-1/2 x 8-1/2 in and 5-1/4 x 7-1/4 in.

What wheel material is most common on polyurethane kingpinless casters?

Polyurethane leads on polyurethane kingpinless casters, rated 600 to 12,500 lb per caster. Among polyurethane kingpinless casters, nylon is next at 800 to 1,400 lb.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

Search