Specialty Casters
Gate Casters
BBQ Pit & Smoker Casters
Keyed Drive Wheels
Drywall Cart Casters
Skid Wheels & Casters for RVs
Leveling Casters
Shopping Cart Wheels & Casters
Band Equipment Casters & Wheels
Low Profile Casters
Cart Wheels & Casters
Toolbox Caster Sets
Bakery Oven Rack Casters
Kitchen Prep Table Caster Sets
Wire Shelving Casters
Silent Glide Casters
Wheel = wheel diameter · capacity is per caster.
Vintage-look casters and cast iron wheels for factory cart restorations and industrial tables. Semi-steel, cast iron, ductile iron, forged steel and rubber, 3 to 12 in, rated 300 to 20,000 lb.
| Buyer | What to match | Materials here | Load band |
|---|---|---|---|
| Restoration / decor | Stem or plate, diameter, spoke look | Cast iron, semi-steel, some rubber on iron | About 300 to a few thousand lb per caster |
| Industrial metal | Plate, duty, floor risk | Ductile, forged steel, heavy semi-steel | Into 7,000 lb ductile V-groove and 20,000 lb forged |
ACTIVE products on this page [S1]. Forged steel kingpinless SKUs drive the 20,000 lb ceiling.
Related: gray iron semi-steel · metal wheels · V-groove wheels · furniture dollies
No. These are new production cast iron and metal casters and wheels with a vintage or industrial look, plus heavy forged steel for plant duty. True salvage antiques are a different market.
About 300 lb to 20,000 lb per caster on active listings. The top end is forged steel kingpinless, not a small furniture stem caster.
Yes, hard metal can mark or dent soft floors. Choose rubber on iron or a polyurethane caster when the floor finish matters.
Measure stem diameter and length or plate bolt pattern, wheel diameter, and tread width. Then match material and load. Do not guess from photos alone.
