The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.
W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.
Plate dimensions shown are overall mounting plate size. When replacing existing casters, select the closest plate size and verify bolt-hole compatibility. BHP = Bolt Hole Pattern, shown under each plate.
Hand Trucks & Mobile Equipment — Convertible & Stair Climbing
Hand trucks, convertible hand trucks, and mobile equipment for moving freight, appliances, boxes, and bulk loads. Convertible 2-wheel to 4-wheel hand trucks, dollies, beverage carts, and heavy-duty stair-climbing hand trucks. 500 to 1,000 lb capacity. Pneumatic, solid rubber, and flat-free wheel options. Stocked at our Mansfield, TX facility.
2-Wheel & Convertible 4-Wheel500 to 1,000 lb CapacityPneumatic, Solid, Flat-Free WheelsStair-Climbing Available99% Same or Next-Day Ship
Loop Handle Hand TruckThe AHT-01 is a 52″ aluminum hand truck with loop handle,...
Hand Truck & Mobile Equipment Comparison
Compare 2-wheel hand trucks, convertible 4-wheel dolly trucks, beverage carts, and stair-climbing hand trucks by capacity, wheel type, and best application.
Type
Capacity
Wheels
Best For
Standard 2-Wheel Hand Truck
500-800 lb
8" or 10" pneumatic/solid
General moving, deliveries, freight
Convertible 2-in-1
500-700 lb
4 wheels (2 fold under)
2-wheel upright OR 4-wheel platform mode
Heavy-Duty Appliance
800-1,000 lb
10" pneumatic + stair glides
Refrigerators, washers, water heaters
Stair-Climbing
500-700 lb
Tri-wheel rotating
Multi-floor moves, dock-less buildings
Beverage / Keg Cart
500-700 lb
Pneumatic + low platform
Bar, restaurant keg and beverage delivery
How to Choose a Hand Truck
1. 2-Wheel vs Convertible 4-Wheel
2-wheel for upright loads (boxes, appliances, kegs) that need to be tilted and rolled. Convertible 4-wheel when you also need a flat platform for bulk loads. Convertibles transition in 5 seconds with no tools.
2. Capacity Match + 25% Headroom
Loaded weight + 25 percent. Standard residential moves: 500 lb. Commercial deliveries: 700-800 lb. Appliance and heavy commercial: 1,000 lb.
3. Wheel Type for Terrain
Pneumatic: smoothest, can flat. Solid rubber: heaviest, zero flats. Flat-free foam: middle option. Match to your typical floors (indoor smooth vs outdoor mixed).
4. Stair-Climbing Option
If you regularly move loads up/down stairs, choose a stair-climbing variant with tri-wheel rotating glides — specifically engineered for stair work. Standard hand trucks struggle on stairs.
Need a hand truck for specific use? Contact CasterHQ for spec match.
CasterHQ stocks 36 hand truck and mobile equipment configurations at our Mansfield, TX facility — 2-wheel, convertible 4-wheel, appliance dolly, stair-climbing, and beverage cart styles. 99 percent ship same or next business day.
Frequently Asked Questions
What is a hand truck?
A 2-wheel cart used to tilt and roll upright loads — boxes, appliances, kegs, freight. The operator tips the cart back to balance the load on 2 wheels, then walks it to the destination. Standard tool in moving, retail, restaurants, delivery.
What's a convertible hand truck?
A hand truck that converts from 2-wheel upright mode to 4-wheel platform mode. Two extra wheels fold out from under to create a flat platform. Useful when you need both tipping and flat-load modes in one tool.
What capacity do I need?
Standard residential and light commercial: 500 lb. Commercial deliveries and most moves: 700-800 lb. Heavy appliances and freight: 1,000 lb. Add 25 percent headroom over max load.
Pneumatic vs solid rubber wheels?
Pneumatic: smoothest ride, can go flat. Solid rubber: zero-flat, firmer ride, heavier. Flat-free foam: middle option. Choose based on terrain (indoor smooth vs outdoor mixed).
Do hand trucks work on stairs?
Standard 2-wheel hand trucks can handle short flights of stairs but it's hard work. For regular multi-floor moves, choose a stair-climbing hand truck with tri-wheel rotating glides designed for stairs.
Can I move a refrigerator with a hand truck?
Yes — use an appliance hand truck with 1,000 lb capacity, notched cradle, and tie-down strap. Standard hand trucks may handle smaller fridges but lack the cradle and strap to hold the appliance vertical during the move.
How wide are typical hand truck loads?
Most 2-wheel hand trucks have a 14-18 inch base plate width. Standard refrigerators (29-36 inch wide) overhang the base plate — this is normal as long as load is balanced and strapped.
How fast do hand trucks ship?
Most ship via FedEx Ground in 1-3 business days from our Mansfield, TX facility. Heavy stair-climbers and appliance dollies may ship LTL freight. Cutoff 2pm Central.
Why Buyers Choose CasterHQ for Hand Trucks
2-Wheel, Convertible, Stair-Climber99% Ship Same or Next Business Day30-Day Return Policy50,000+ Commercial BuyersBBB A+ Rated Since 2008Built for Moving, Delivery & Beverage
The premium tier of mobile hand truck equipment. B&P Manufacturing builds convertibles, stair-climbing hand trucks, and the battery-powered XCELORATOR line in Cadillac, MI.
